Conveyor speed is determined by your Tommy Wash Controller System. Typically the hydraulic power unit is located at the rear of the wash near the conveyor drive, making manual speed changes difficult. With the Tommy conveyor power unit and the Tommy Controller car wash operators and owners have the ability to set the conveyor speed ..
The DR Motor uses a new connection designation. Instead of using DTxx as used with DT/DV motors, the DR motor uses Rxx. The numbers represented by “xx” are usually the same for the new DR as the old DT/DV. For example, the DT13 standard connection previously used for a Δ/Y motor (230/400-50Hz) is now an ..
Variable Speed Drives – Helping Build a Greener Car Wash “Variable frequency drives, or variable speed drives (VSDs), can greatly increase motor efficiency in a variety of applications. VFDs are electrical devices which adjust the rotational speed of fan and pump motors in response to varying heating and cooling loads, and thus are much more ..