..
Category : New Wash
Home » Archive by category : New Wash
The recommended clearance height / clearance bar height for Tommy Car Wash Systems equipment is 7’ – 2” (8..
Step 1. Close wash for planned downtime, typically 1-2 weeks. Step 2. Remove floor and excavate according to Belt Pit Plan, leaving wash equipment in place. Step 3. Pour concrete on new Pit floor Step 4. Allow concrete time to cure. Step 5. Pour side wall Step 6. Install new Tommy Transporter Belt Conveyor and ..
The attached rendering shows an approximate “trim line” for mitter cloth included as a combo unit component along with wraps, hugger, or contour brushes. There are no exact, universal dimensions as equipment setups vary. Therefore cloth should be trimmed on a case-by-case basis. Guidelines for Cloth Trimming: -REMEMBER! Cloth is trimmed to prevent it from ..
Partition Wall Installation Guide (PDF) &nb..
..
1 Power on iPad. Default password is 000000. 2 Open the main ‘Settings’ menu from the home screen. 3 In the Settings Menu select ‘Wi-Fi’. 4 Select your wash’s Wi-Fi network (this network should not be available to customers) and enter your network’s password. 5 Once you connect to the network select “iCloud” from main ..
Click the download button below to view Tommy Car Wash’s Blower Noise study..